groove/iso_9692_1_2013_12/VGroove-0.1.0¶
VGroove representation.
Outline
Schema Definitions ¶
This type is an object with the following properties:
- t
../terms-0.1.0#/definitions/workpiece-thickness Required The workpiece thickness. - alpha
../terms-0.1.0#/definitions/groove-angle Required The full groove angle. - b
../terms-0.1.0#/definitions/root-gap Required The root gap between both plates. - c
../terms-0.1.0#/definitions/root-face Required The root face.
Examples ¶
A simple V-Groove:
!<asdf://weldx.bam.de/weldx/tags/groove/iso_9692_1_2013_12/VGroove-0.1.0>
t: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 15, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> millimeter}
alpha: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 40, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> degree}
b: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 2, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> millimeter}
c: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 1, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> millimeter}
code_number: ['1.3', '1.5']
Original Schema ¶
%YAML 1.1
---
$schema: "http://stsci.edu/schemas/yaml-schema/draft-01"
id: "asdf://weldx.bam.de/weldx/schemas/groove/iso_9692_1_2013_12/VGroove-0.1.0"
title: |
VGroove representation.
examples:
-
- A simple V-Groove
- |
!<asdf://weldx.bam.de/weldx/tags/groove/iso_9692_1_2013_12/VGroove-0.1.0>
t: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 15, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> millimeter}
alpha: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 40, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> degree}
b: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 2, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> millimeter}
c: !<asdf://weldx.bam.de/weldx/tags/units/quantity-0.1.0> {value: 1, units: !<asdf://weldx.bam.de/weldx/tags/units/units-0.1.0> millimeter}
code_number: ['1.3', '1.5']
type: object
properties:
t:
description: |
The workpiece thickness.
$ref: "../terms-0.1.0#/definitions/workpiece-thickness"
alpha:
description: |
The full groove angle.
$ref: "../terms-0.1.0#/definitions/groove-angle"
b:
description: |
The root gap between both plates.
$ref: "../terms-0.1.0#/definitions/root-gap"
c:
description: |
The root face.
$ref: "../terms-0.1.0#/definitions/root-face"
required: [t, alpha, b, c]
propertyOrder: [t, alpha, b, c]
...